Dynacord PCL 1225T 2x250 WATTS POWER AMPLIFIER ,100V Output Transformer.

The DYNACORD PCL-Series power amp line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design. All models in the PCL-Series provide several protection circuits which not only prevent the power amplifier itself but also the connected loudspeaker systems from being damaged.

• Load Impedance: 8 Ohms / 4 Ohms / 100V / 70V / 50V
• Maximum Midband Output Power, THD=1%, 1 kHz: 135 W / 270 W / 270 W / 270 W / 270 W
• Rated Output Power, THD < 0.2%, 20 Hz - 20 kHz: 125 W / 250 W / 250 W / 250 W / 250 W
• Maximum Bridged Output Power, THD=1%, 1 kHz: 540 W / -
• Maximum RMS Voltage Swing, THD=1%, 1 kHz: 35.4 V / 35.4 V / 117 / / 82 V / 59 V
• Voltage Gain at 1 kHz: 32.2dB / 32.2dB / 42.2dB / 39.1dB / 36.2dB
• Slew Rate at 1 kHz: 18 / 18 / 61 / 41 / 29 V/micros
• Power Consumption at 1/8 Maximum Power: - / - / 330 W / - / -
• Input Sensitivity: 0dBu
• THD at Rated Output Power: <0.1 %
• Crosstalk, ref. 1 kHz: < -75dB
• Frequency Response: <65 Hz - 40 kHz
• Power Bandwidth: < 45 Hz - > 20 kHz
• Input Impedance: > 20 kOhms
• Damping Factor: > 250
• Signal to Noise Ratio, A-Weighted: 103dB
• Dimensions (W x H x D), mm: 483 x 88 x 405 (2RU)
• Weght: 23.5 kg

INFO LÄNK: https://products.dynacord.com/emea/en/pcl-1225t/

Nypris 9200:-

OBS! Avhämtas i Markaryd eller skickas med bussgods!!