Nypris 10090 KR

Input 1 och 2 fungerar inte. Ser lite använd ut.

Gear4music's 5 års garanti gäller ej.

Full Description

The ins and outs

The HUB4 will provide you with 16 balanced line-level outputs. These will enable you to carry eight stereo mixes from the connected DP48 mixers for connections in the side rack. This removes the need to run further lines from personal mixers to the transmitters. Thanks to this you'll reduce the size of your rig,its set up time, as well as maximising its reliability.

Effortless integration

The HUB4 effortlessly interfaces with the new Midas DL8 stage box. Making bulky analog sub-snakes a thing of the past. You'll be free to connect your DL8 stage box to any of the four HUB4 ports using a single CAT5E STP cable. Yes, that's right. One cable is all that's necessary to enable the HUB4 to power up to 4 stage boxes via PoE support – IEEE802.3at per port – allowing for shorter analogue lines on stage.

Versatile choices

Midas' HUB4 also facilitates one of the exceptional features of DP48 Personal Monitoring systems in which one of your DP48 units can be designated as Master and used to control one or more units in Slave mode. Midas have ensured that personal mixers are enumerated and the master DP48 is connected to port 1 of the first HUB4 in a daisy chain, allowing it to control the respective slaves. Thanks to this, either a technically minded band mate or technician will be free to help tweak the personal monitors of artists performing on stage.

Features

• Personal monitoring system hub with PoE remote powering for up to 4 DP48 personal mixers and compatible stage boxes
• AES50 IN and THRU ports for cascading hubs or stage boxes with 48 bidirectional channels at 48/44.1 kHz
• 16 balanced analogue outputs for sending 4x2 personal stereo mixes to IEM transmitters in the side rack
• Channel naming and Group assignments can be distributed from compatible M32 consoles
• Midas DL8 Stage Boxes can be connected and powered from ports 1-4
• Personal mix outputs can be monitored via AES50 upstream to connected consoles
• Supports remote control forwarding of a DP48 personal mixer from another DP48
• Front panel buttons for sending signals to analogue output groups 1-4, for StageCONNECT and for AES50-A upstream
• Remote operation via shielded CAT5e cable up to 260 ft / 80 m length recommended
• Features Neutrik etherCON* AES50 network ports
• Rugged 1U chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
• 10-Year Warranty Program*
• Designed and engineered in the U.K.

Specifications

• Connections:
  • AES50 sync master / thru: 2 x RJ45
  • AES50 remote outputs: 4 x RJ45
  • Remote power: PoE (IEEE802.3at)
  • USB Type: B
  • StageCONNECT: 1 x XLR, male
  • Analogue outputs: 4 x XLR, balanced, 12 x 1/4" TRS, balanced
• Controls / Indicators:
  • Power: 1 x blue LED (button)
  • AES50-A: 1 x green LED, 1 x button LED, green/white
  • StageCONNECT: 1 x green / white (button), 1 x green LED (port active)
  • Ports: 1 - 4 4 x button LED, green/white
  • TO AES50:-A 2 x green LED
  • AES50: 2 x green LED (good connection), 2 x red LED (error)
• AES50:
  • Audio channels: 48
  • Sample rate: 44.1 / 48 kHz
  • Sample word length: 24 bit
  • Clock synchronization: AES50 Sync Master
  • Latency: min. 70 µs per node (AES50)
  • Cable: shielded CAT 5e
  • Cable length: max. 100 m (330 ft)
• StageCONNECT:
  • Audio channels in / out: 16 / 16
  • Sample rate: 44.1 / 48 kHz
  • Sample word length :24 bit
  • Phantom power: +12 V DC / 18 W
  • Cable: XLR balanced, mic or DMX cable
  • Cable length: max. 40 m (132 ft) with DMX typ. 20 m with microphone cable
• Power Supply, Voltage, Current Consumption:
  • Switch mode power supply: Autorange, 100-240 V 50/60 Hz
  • Power consumption: 180 W
  • Mains connection: Standard IEC receptacle
• Dimensions / Weight:
  • Dimensions: (H x W x D) 50 x 482 x 291 mm (1.97 x 18.98 x 11.46")
  • Weight: 8.72 lbs / 3.96 kg
• Product Code: HUB4

SKU: HUB4-eBay-CCD1603