5 HDD, 3 SSD Mini-ITX NAS chassis - MODCASE MASS premium
Stopt 18 nov 16:03
SEK 599
Kopersbescherming is optioneel voor bedrijven.
Verzendkosten naar Nederland
SEK 95 GLS via DB Schenker
SEK 116 DHL
SEK 464 PostNL via PostNord
Gecomb. verzending
3 dagenKan opgehaald worden
Alle betalingen worden voor je veiligheid door Tradera gecontroleerd.
Directe betaling
Kopersbescherming geldt voor alle betaalmethoden
1/0
Beschrijving
Vertaald door
MODCASE MASS premium - 3D printed and assembled.
Key features of the NAS chassis:
- 5 x 3.5" HDD bays.
- 3 x 2.5" SSD bays.
- 140mm fan at the bottom.
- Optional 140mm fan at the top.
- Mini-ITX motherboard.
- SFX power supply.
- Height: ~37-40.5 CM, depending on the hat configuration.
- Width/Depth: ~16.5/20.5 CM.
Package content:
- One assembled chassis (you pick the colour).
- One power button.
- Extra clips for the side panels.
3D Prints:
- All chassis are printed with PETG plastic, melts at ~220C.
- Black: sold, but I can print another one on demand.
- White: clip mounted striped hat, extra ventilation holes, 2-pieces drive-bay.
- Gray: sold, but I can print another one on demand.
Text me if you need:
- SATA cables.
- HDD/motherboard screws.
- Another drive-bay for total of 10 x 3.5" HDD places.
- Another side-panel pattern, colour, or extra mods.
- A free 140mm Fractal Design fan (used).
Important: the chassis is 3D printed, minor cosmetic defects are to be expected. Please ask for extra pictures if you are unsure. Injection molding quality is possible but premium filament and reduced print speeds are required for that.
Other colours: feel free to contact me if you want another colour. Right now I have black, brown, orange, pink, purple, blue, green, red, and yellow plastic in stock.
Key features of the NAS chassis:
- 5 x 3.5" HDD bays.
- 3 x 2.5" SSD bays.
- 140mm fan at the bottom.
- Optional 140mm fan at the top.
- Mini-ITX motherboard.
- SFX power supply.
- Height: ~37-40.5 CM, depending on the hat configuration.
- Width/Depth: ~16.5/20.5 CM.
Package content:
- One assembled chassis (you pick the colour).
- One power button.
- Extra clips for the side panels.
3D Prints:
- All chassis are printed with PETG plastic, melts at ~220C.
- Black: sold, but I can print another one on demand.
- White: clip mounted striped hat, extra ventilation holes, 2-pieces drive-bay.
- Gray: sold, but I can print another one on demand.
Text me if you need:
- SATA cables.
- HDD/motherboard screws.
- Another drive-bay for total of 10 x 3.5" HDD places.
- Another side-panel pattern, colour, or extra mods.
- A free 140mm Fractal Design fan (used).
Important: the chassis is 3D printed, minor cosmetic defects are to be expected. Please ask for extra pictures if you are unsure. Injection molding quality is possible but premium filament and reduced print speeds are required for that.
Other colours: feel free to contact me if you want another colour. Right now I have black, brown, orange, pink, purple, blue, green, red, and yellow plastic in stock.
