1/0
Beschrijving
Vertaald door
V2 replaces the 2x 24mm buttons from V1.
- Illuminating Engine Start Button (The toggle switch under the red cover needs to be engaged in order for the button to light up.
- Hazard button included on V2 is a latching button, press once to engage, press again to disengage.
- V2 has a Carbon Fiber Vinyl top.
-------
22 Programmable Function, button box.
- 1x Latching Toggle
- 1x 24mm Latching - Engine Start Button with LED, the button is momentary (self reset)
-1x 24mm Hazard Button (Latching)
- 7x 12mm momentary buttons
- 3x momentary-off- momentary toggles
- 2x EC11 rotary encoders (3 functions each)
Bring a new level of immersion to your simracing experience with the JA07 Button Box.
Mounting
75mm x 75mm Universal VESA bolt pattern, M5 Threads (M5 screws not included).
These enclosures are made using PLA material on a 3D printer. They are designed using a textured exterior for a more rugged look and feel.
Each box has a total of 22 functions, allowing you to program endlessly to suit your simracing needs. For example, the Latching Toggle can be programmed for: fuel or ignition, depending on what simulator you're using. (This toggle switch does not return automatically, it is a latching switch so you'll have to close the red cover to disengage it).
3x MOM-OFF-MOM toggle switches with rubber sleeves (removable). Each of these toggle switches offer 2 functions each.
Installed are 2x EC11 rotary encoders, each encoder gives you 3 programmable functions. That being: rotating left, rotating right and pressing down on the knob will give you a momentary button.
These boxes are programmed using an Arduino Pro Micro board. It interfaces with your PC using a high quality UGREEN USB-A cable that is 2 Meter's (6ft) long.
The boxes use knurl brass threaded inserts for the face plate and for the mounting on the back so you'll never have stripped threads like other boxes that screw directly into the plastic enclosed.
Measurements:
134.17 x 254.284 x 42.933mm
All orders will include an extra knob (yellow) which can be swapped with any of the EC11 rotary encoders. Also included are 3x 6mm locknut so if you prefer to use the 3 6mm toggle switches without sleeves, you'll need to secure them with the locknuts included.
PC only.
See my other listing for V1
- Illuminating Engine Start Button (The toggle switch under the red cover needs to be engaged in order for the button to light up.
- Hazard button included on V2 is a latching button, press once to engage, press again to disengage.
- V2 has a Carbon Fiber Vinyl top.
-------
22 Programmable Function, button box.
- 1x Latching Toggle
- 1x 24mm Latching - Engine Start Button with LED, the button is momentary (self reset)
-1x 24mm Hazard Button (Latching)
- 7x 12mm momentary buttons
- 3x momentary-off- momentary toggles
- 2x EC11 rotary encoders (3 functions each)
Bring a new level of immersion to your simracing experience with the JA07 Button Box.
Mounting
75mm x 75mm Universal VESA bolt pattern, M5 Threads (M5 screws not included).
These enclosures are made using PLA material on a 3D printer. They are designed using a textured exterior for a more rugged look and feel.
Each box has a total of 22 functions, allowing you to program endlessly to suit your simracing needs. For example, the Latching Toggle can be programmed for: fuel or ignition, depending on what simulator you're using. (This toggle switch does not return automatically, it is a latching switch so you'll have to close the red cover to disengage it).
3x MOM-OFF-MOM toggle switches with rubber sleeves (removable). Each of these toggle switches offer 2 functions each.
Installed are 2x EC11 rotary encoders, each encoder gives you 3 programmable functions. That being: rotating left, rotating right and pressing down on the knob will give you a momentary button.
These boxes are programmed using an Arduino Pro Micro board. It interfaces with your PC using a high quality UGREEN USB-A cable that is 2 Meter's (6ft) long.
The boxes use knurl brass threaded inserts for the face plate and for the mounting on the back so you'll never have stripped threads like other boxes that screw directly into the plastic enclosed.
Measurements:
134.17 x 254.284 x 42.933mm
All orders will include an extra knob (yellow) which can be swapped with any of the EC11 rotary encoders. Also included are 3x 6mm locknut so if you prefer to use the 3 6mm toggle switches without sleeves, you'll need to secure them with the locknuts included.
PC only.
See my other listing for V1
Anderen vonden het ook leuk
Dit vind je misschien ook leuk
Sim Racing 22 Programmable Function button box V2
Stopt 27 jul 20:31
SEK 1 650
SEK 1 735 met kopersbescherming.
