2st Väggsändare NodOn CWS-3-1-00 Z-Wave Plus
Afsluttet 13 nov. 20:49
Slutpris
∙
121 SEK
129 SEK med køberbeskyttelse.
Sthlmkillen vandt auktionen
Forsendelsespriser til Danmark
72 SEK PostNord
72 SEK PostNord
115 SEK DHL
139 SEK GLS via DB Schenker
Samlet fragt
1 dagKan afhentes i
Alle betalinger gennemgås af Tradera for din sikkerhed.
Direkte betaling
Køberbeskyttelse gælder alle betalingsmetoder
Beskrivelse
Oversat af
NodOn - Wall Switch Cozy White
Artikelnummer: CWS-3-1-00
With the NodOn wall switch you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.
The installation of this wall switch is easy, because there are no cables to lay or to consider. The switch has to be just pushed into the mounting plate which will be fixed to any planar surface by double-sided adhesive tape. Alternatively the mounting plate can be screwed on the wall or inserted to a wall box.
Control your smart home with the battery wall switch from any place within the room. The switch is as easy to handle as an ordinary light switch.
TECHNICAL DATA
Power supply: CR2032 battery – 1.5 to 2 years lifetime
4 buttons
Wall mounting: using adhesive bounding (included) or screws (not included)
Operational temperature: 0°C to 40°C – Altitude – 2.000m
Radio protocol: Z-Wave® 868.4MHz – 500 Series – Compliant Z-Wave Plus® SDK 06.51.06
Range: 40m indoor / 70m outdoor
Dimensions: 80*80*15mm
Artikelnummer: CWS-3-1-00
With the NodOn wall switch you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.
The installation of this wall switch is easy, because there are no cables to lay or to consider. The switch has to be just pushed into the mounting plate which will be fixed to any planar surface by double-sided adhesive tape. Alternatively the mounting plate can be screwed on the wall or inserted to a wall box.
Control your smart home with the battery wall switch from any place within the room. The switch is as easy to handle as an ordinary light switch.
TECHNICAL DATA
Power supply: CR2032 battery – 1.5 to 2 years lifetime
4 buttons
Wall mounting: using adhesive bounding (included) or screws (not included)
Operational temperature: 0°C to 40°C – Altitude – 2.000m
Radio protocol: Z-Wave® 868.4MHz – 500 Series – Compliant Z-Wave Plus® SDK 06.51.06
Range: 40m indoor / 70m outdoor
Dimensions: 80*80*15mm