Lunchbox renoverad

Hope it work now, i have taken it apart put it through testing. I couldn't figure out how to get the motherboard out so i did not repaste the cpu, but this should be a non issue since temps are ok. Every cable is zip tied into place, the gpu is now screwed in slightly higher and on both sides(had to jerry rig it slightly). The gpu riser is now zip tied into place so it cannot move and touch the fan. The GPU PCIE version is set in the bios to GEN3 due to potential riser issues with GEN 4. Recommended to keep this way. Performance loss is negligable. I removed tape and put metal brackets in place instead. Tried to file them down but care if they are slightly sharp. Unfortunately there is too little space to swap the fans to outtake (recommended) so they are still as before intake fans at the bottom. Temps= CPU max 92C GPU=85C Hotspot=106C XMP is enabled 3200mhz. Cpu is undervolted by 10mv to decrease temperature. It was stable during all my testing. (To change this "Bios->Curve optimizer->0mv") Tried gaming on it and had no crashes, if crashes continue and your room is hot, try limiting FPS to 60 and putting all setting to low and see if you do not crash then.

Some settings are changed in windows and some programs are installed. I used the pc during a week as my daily driver to see if it would crash during normal use. So if i forgot to remove stuff sorri :p ps my steam is probably still logged in.

Also i packed your bebe securely in a box with foam so it should arrive safe and sound