Audioquest Forest USB 2.0 A->Micro kabel 1.5m längd. DEMO EX.

Audioquest Forest USB-kabel med USB-A till Micro anslutning. Ordinariepris: 1298:-. Demo exemplar.

Tillverkarens kommentar:
Semi-Solid Concentric 0.5% Silver Conductors
Semi-Solid Concentric Conductors greatly reduce strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like USB audio and video. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a 100% silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality USB cables.

Metal-Layer Noise-Dissipation
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical ”reference” ground plane, which in turn causes a distortion of the signal. Noise-Dissipation ”shields the shield,” absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

Hard-Cell Foam Insulation
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.

Direction-Controlled Conductors
All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance. A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly.

Skick
Det står på beskrivningen under varje annons om varan är oanvänd eller använd. Varan säljs enligt bilder och eventuell defektbeskrivning.

Betalning
Vi använder oss av Traderabetalning. Annonsen betalas inom 7 dagar och vi förbehåller oss rätten att häva köp som inte betalas inom utsatt tid.

Leverans & samfrakt
Alla våra varor skickas med Traderafrakt inom Sverige och inom EU. Vi erbjuder samfrakt vid köp av flera varor.

Avhämtning
Avhämtning sker senast inom 7 dagar enligt överenskommelse. Betalning sker innan avhämtning via Traderabetalning. Vi förbehåller oss rätten att häva köp som inte hämtas inom utsatt tid.

Retur
Vänligen kontakta oss via meddelandefunktionen på Tradera för att informera om en retur. Vi erbjuder återbetalning av varan om den returneras inom 14 dagar enligt distansavtalslagen (SFS 2005:59). Varan skall returneras i oförändrat skick och med komplett oförändrat originalemballage, originalemballage ses som en del av produkten. Vi förbehåller oss rätten att debitera kund eller neka retur om något skulle saknas, vara skadat eller om varan har använts. Köparen står själv för returkostnaden och äger varan och ansvaret för den fram tills att vi mottagit den hos oss.