Shadowstrike Apex Suppressor
Stopt 18 nov 20:01
Start prijs:
∙0 biedingen
SEK 180
SEK 191 met kopersbescherming.
Verzendkosten naar Nederland
SEK 78 GLS via DB Schenker
SEK 107 DHL
SEK 294 PostNord
Gecomb. verzending
1 dagAlle betalingen worden voor je veiligheid door Tradera gecontroleerd.
Directe betaling
Kopersbescherming geldt voor alle betaalmethoden
1/0
Beschrijving
Vertaald door
APEX Suppressor — quiet control when it matters
Moving up a narrow stairwell in CQB, every sharp sound becomes a problem. APEX smooths the pressure spike so rounds land where you aim without pulling extra attention. Internal channels route gas away from the BB path to reduce turbulence and keep bursts even. The 8° forward vent shifts overpressure away from you and your team. The shell is discreet and holds up to rain, dirt, and bumps—no fuss, just steady performance.
What you’ll notice in play
Softer muzzle tone and less “pop,” especially in short bursts
More consistent grouping when the pace picks up
Fewer disturbances for teammates when you’re stacked tight
Tech specs
Thread: 14 mm CCW
Core: 12 flow-through baffles (gas guided around BB path)
Vent: 8° forward overpressure exhaust
Materials: PETG (standard), ASA (UV/heat), CF-PETG (stiffer/lighter feel)
Sound: Internal tests show about ~3–6 dB(A) lower at the muzzle (varies by replica, ammo, environment, and semi/full-auto)
3D printing settings
Material: PETG (or optional reinforced composites)
Nozzle: 0.4 mm
Layer Height: 0.15 mm
Infill: 15–25%
Orientation: Print halves flat on mating faces
Moving up a narrow stairwell in CQB, every sharp sound becomes a problem. APEX smooths the pressure spike so rounds land where you aim without pulling extra attention. Internal channels route gas away from the BB path to reduce turbulence and keep bursts even. The 8° forward vent shifts overpressure away from you and your team. The shell is discreet and holds up to rain, dirt, and bumps—no fuss, just steady performance.
What you’ll notice in play
Softer muzzle tone and less “pop,” especially in short bursts
More consistent grouping when the pace picks up
Fewer disturbances for teammates when you’re stacked tight
Tech specs
Thread: 14 mm CCW
Core: 12 flow-through baffles (gas guided around BB path)
Vent: 8° forward overpressure exhaust
Materials: PETG (standard), ASA (UV/heat), CF-PETG (stiffer/lighter feel)
Sound: Internal tests show about ~3–6 dB(A) lower at the muzzle (varies by replica, ammo, environment, and semi/full-auto)
3D printing settings
Material: PETG (or optional reinforced composites)
Nozzle: 0.4 mm
Layer Height: 0.15 mm
Infill: 15–25%
Orientation: Print halves flat on mating faces
