Neets Audio Pro Amplifier model 2:25 Class D with DSP
Stopt 6 nov 21:08
Start prijs:
∙0 biedingen
SEK 599
SEK 631 met kopersbescherming.
Verzonden binnen de EU
Niet gespecificeerdDe verkoper heeft geen verzendoptie voor levering naar het geselecteerde land. Neem contact op met de verkoper voor een offerte.
Gecomb. verzending
1 dagAlle betalingen worden voor je veiligheid door Tradera gecontroleerd.
Directe betaling
Kopersbescherming geldt voor alle betaalmethoden
1/0


Beschrijving
Vertaald door
Neets Audio Amplifier - 2:25. Designed in Denmark.
MSRP: 300+ EUR / £270
avpartsmaster.co.uk/neets-audio-amplifier-2-25-p173816
- Class D amplifier with built-in DSP
- High efficiency amplifier with high quality sound
- 2-channel stereo amplifier
- 2x25 Watts @8 ohm or 2x35 Watts @4 ohm both in stereo
- Bridge mode: 1x34 Watts @8 ohm or 1x56 Watts @4 ohm both in bridge mode
- USB audio
- Provides audio playback and volume control on connected PC or Mac
- 1 LAN port
- Enables control of the amplifier and adds two extra RS-232 ports for expansion of the control system
- 2 Bi-directional RS-232 ports
- Used for control or expanding the AV system with more devices
- 4 General Purpose I/O ports
- Used for extra input/output ports for control of relays, switches and sensors.
- Auto power function
- Powers on when signal is detected, and enter sleep-mode automatically after 15 minutes without signal
- Input 1 Mix function
- Possible to set Input 1 as an input, that mixes with the current selected input.
- Comes with 100-220V adapter and speaker connector, see photos, thanks
MSRP: 300+ EUR / £270
avpartsmaster.co.uk/neets-audio-amplifier-2-25-p173816
- Class D amplifier with built-in DSP
- High efficiency amplifier with high quality sound
- 2-channel stereo amplifier
- 2x25 Watts @8 ohm or 2x35 Watts @4 ohm both in stereo
- Bridge mode: 1x34 Watts @8 ohm or 1x56 Watts @4 ohm both in bridge mode
- USB audio
- Provides audio playback and volume control on connected PC or Mac
- 1 LAN port
- Enables control of the amplifier and adds two extra RS-232 ports for expansion of the control system
- 2 Bi-directional RS-232 ports
- Used for control or expanding the AV system with more devices
- 4 General Purpose I/O ports
- Used for extra input/output ports for control of relays, switches and sensors.
- Auto power function
- Powers on when signal is detected, and enter sleep-mode automatically after 15 minutes without signal
- Input 1 Mix function
- Possible to set Input 1 as an input, that mixes with the current selected input.
- Comes with 100-220V adapter and speaker connector, see photos, thanks


























