Features:
• Measure DVB-S and DVB-S2 signals (920-2150MHz)
• Spectrum-analyzer with zoom function
• EasyFind satellite identifi cation for faster installations
• Super bright 3” LCD display
• Very sensitive, easy to maximize weak and strong signals
• Digital MER, BER, QPSK (DVB-S), 8PSK (DVB-S2) and S/N-ratio
• Readout NIT -gives Satellite ID and TV/Radio-channel info
• X-pol. function for optimize LNB skew
• DiSEqC according to level 1.0, 1.1 and 1.2
• LNB voltage 13/18V, 22KHz tone switch
• Stores up to 99 memory positions
• RS232 for PC-connection (up/download)
• Built in, rechargeable battery
• AC/DC adapter included
• Nice & small, only 1,5Kg complete with carrying case
Technical specification
Input frequency: 920-2150MHz.
Sat-TV min level in: About 35 dBuV (noise).
Sat-TV max level in: About 100 dBuV.
Input/output impedance: 75 Ohm, F-connectors. Measuring method (analog):
Spectrum analyzer
Signal presentation on LCD-display in form of thermometer scales.
Pitch-tone, highest tone on loudspeaker.
Measuring method (Digital): BER (bit error rate) MER (Modulation error rate)
SNR (signal/noise-ratio)
Constellation (QPSK & 8PSK)
Max-level: Thermometer scales showing max.
Maxhold function.
BER, MER, SNR, QPSK and 8PSK
Satellite-identification: Yes, by reading out the NIT in the bitstream.
Info about the TV and Radio channels.
Memory: Up to 99 transponders can be stored with name.
Memory search: The instrument scans the memory positions and presents the matching transponders.
Presentation: On LCD 3”
PC-connection: Yes, RS232-output
Power out: Yes, 13-18V.22 kHz tone: Yes, on/off.
DiSEqC: Yes, all 1.0 and 1.1. Also Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect.
Battery: Rechargable 12v, 1.25amp/hour.
Accessories: Nylon carrying-case.
Power-supply of 230V13.5V,1.7A
BNC/F-adapter.
Operational: About 1 hour on a fully charged Battery.
Weight: 1.5kg incl.battery & carrying case.