Doepfer Polyfoniskt System - 5 st eurorackmoduler

Dessa moduler är, i princip , i nyskick och du erbjuds här halva nypriset (thomann.de). Priset är det absolut lägsta som jag är beredd att sälja för. Mvh. den_mekaniske_mannen

Från Doepfers nätsida:
Doepfer A-111-4 Quad VCO (18HP, version 1, 2018)
Contains four precision VCOs and has individual controls, inputs and outputs for each VCO available as well as a common control and output unit. After all the A-111-4 is very similar to four A-111-3 without LFO mode but built in output mixers for the three waveforms, and a master unit for all four VCOs.
Doepfer A-105-4 Quad Poly SSI VCF (8HP)
Polyphonic filter that contains four identical 24dB Lowpass filters (SSM2044/SSI2144 type). It has available common manual controls and CV inputs with attenuators for all parameters.
Doepfer A-141-4 Quad Poly VCADSR (8HP)
A quad voltage controlled Envelope generator and is primarily planned for polyphonic applications. The module contains four ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor). Common manual controls and CV inputs with polarizers are available for the parameters Attack (A), Decay (D), Sustain (S) and Release (R). Each of the four envelope generators has available a gate input, a control LED and an envelope output.
Doepfer A-132-8 Octal Poly VCA (8HP)
Contains four VCA pairs. The amplification range for each VCA is 0 ... 1. 0V CV corresponds to amplification 0 (full suppression), +10V CV to amplification 1. Each pair includes two daisy-chained VCAs. One VCA has a linear control scale, for the second VCA linear or exponential control scale can be chosen by means of jumpers. We decided to provide two VCAs for each voice because usually one VCA is required for loudness envelope and a second one for velocity (or other functions like individual voltage-controlled loudness of each voice, amplitude modulation and so on). All VCAs are DC coupled and can be used in special applications also for the processing of control voltages.
Doepfer A-190-5 Polyphonic USB/MIDI to CV/Gate Interface (16HP)
For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled by Midi velocity, volume, modulation, after touch or free assignable Midi controllers. The resolution of the CV outputs is 12 bit and the voltage range is 0-10V.