1/0
Beskrivning
22 Programmable Function, button box.
- 1x Latching Toggle
- 2x 24mm momentary (self reset) buttons
- 7x 12mm momentary buttons
- 3x momentary-off- momentary toggles
- 2x EC11 rotary encoders (3 functions each)
Bring a new level of immersion to your simracing experience with the JA07 Button Box.
Mounting
75mm x 75mm Universal VESA bolt pattern, M5 Threads (M5 screws not included).
These enclosures are made using PLA material on a 3D printer. They are designed using a textured exterior for a more rugged look and feel.
Each box has a total of 22 functions, allowing you to program endlessly to suit your simracing needs. For example, the Latching Toggle can be programmed for: fuel or ignition, depending on what simulator you're using. (This toggle switch does not return automatically, it is a latching switch so you'll have to close the red cover to disengage it).
The 24mm (Black and Red) can be used for ignition (black) and hazard lights (red). These buttons are momentary.
The 24mm (Black and Red) can be used for ignition (black) and hazard lights (red). These buttons are momentary.
3x MOM-OFF-MOM toggle switches with rubber sleeves (removable). Each of these toggle switches offer 2 functions each.
Installed are 2x EC11 rotary encoders, each encoder gives you 3 programmable functions. That being: rotating left, rotating right and pressing down on the knob will give you a momentary button.
These boxes are programmed using an Arduino Pro Micro board. It interfaces with your PC using a high quality UGREEN USB-A cable that is 2 Meter's (6ft) long.
The boxes use knurl brass threaded inserts for the face plate and for the mounting on the back so you'll never have stripped threads like other boxes that screw directly into the plastic enclosed.
Measurements:
134.17 x 254.284 x 42.933mm
All orders will include an extra knob (yellow) which can be swapped with any of the EC11 rotary encoders. Also included are 3x 6mm locknut so if you prefer to use the 3 6mm toggle switches without sleeves, you'll need to secure them with the locknuts included.
PC only.
See my other listing for V2
- 1x Latching Toggle
- 2x 24mm momentary (self reset) buttons
- 7x 12mm momentary buttons
- 3x momentary-off- momentary toggles
- 2x EC11 rotary encoders (3 functions each)
Bring a new level of immersion to your simracing experience with the JA07 Button Box.
Mounting
75mm x 75mm Universal VESA bolt pattern, M5 Threads (M5 screws not included).
These enclosures are made using PLA material on a 3D printer. They are designed using a textured exterior for a more rugged look and feel.
Each box has a total of 22 functions, allowing you to program endlessly to suit your simracing needs. For example, the Latching Toggle can be programmed for: fuel or ignition, depending on what simulator you're using. (This toggle switch does not return automatically, it is a latching switch so you'll have to close the red cover to disengage it).
The 24mm (Black and Red) can be used for ignition (black) and hazard lights (red). These buttons are momentary.
The 24mm (Black and Red) can be used for ignition (black) and hazard lights (red). These buttons are momentary.
3x MOM-OFF-MOM toggle switches with rubber sleeves (removable). Each of these toggle switches offer 2 functions each.
Installed are 2x EC11 rotary encoders, each encoder gives you 3 programmable functions. That being: rotating left, rotating right and pressing down on the knob will give you a momentary button.
These boxes are programmed using an Arduino Pro Micro board. It interfaces with your PC using a high quality UGREEN USB-A cable that is 2 Meter's (6ft) long.
The boxes use knurl brass threaded inserts for the face plate and for the mounting on the back so you'll never have stripped threads like other boxes that screw directly into the plastic enclosed.
Measurements:
134.17 x 254.284 x 42.933mm
All orders will include an extra knob (yellow) which can be swapped with any of the EC11 rotary encoders. Also included are 3x 6mm locknut so if you prefer to use the 3 6mm toggle switches without sleeves, you'll need to secure them with the locknuts included.
PC only.
See my other listing for V2
Sim Racing 22 Programmable Function button box V1
Slutar 22 jun 23:06
Utropspris
∙0 Bud
1 450 kr
1 525 kr med köparskydd.
