1/0
Beskrivning
Förbättra din retrospelupplevelse med en RAD2X HDMI-adapter. Denna adapter är designad för Playstation 1 och 2 och ger en klarare bild via HDMI. Adaptern är tillverkad av Retro Gaming Cables (RGC) och drivs av RetroTINK.
Helt i nyskick och knappt använd. Komplett med en USB-kabel för ström samt HDMI-Micro Hdmi för bild medföljer så bara att starta upp & spela.
Packas väl i kartong med bubbelplast och skickas med PostNord spårbart.
Mvh
**Info från RGC hemsida under**
The RAD2X is the perfect plug and play low latency solution for connecting your Sony PlayStation 1 to a modern flat screen television. This is based on the same technology used in the RetroTINK2x with the added bonus of supporting RGB video, and unlike other all-in-one HD cable solutions the RAD2X correctly interprets the the 240p signal correctly and processes this as a progressive scan image and then line doubles this to 480p. This product does unfortunately require a microUSB power supply to function. However on the plus side the RAD2X benefits from fast switching between screen resolutions and also a smoothing feature for enhancing 3D games!
This was designed specifically for use on the original PlayStation 1 console, however this will also work on the PlayStation 2, but unfortunately the RAD2X will not accept any input signals above 240p/480i, therefore the PlayStation 2 needs to be set to RGB mode and not Y Cb/Pb Cr/Pr mode.
Specifications:
Formats: 240p/480i, 288i/576i, NTSC and PAL
Input: RGB internally converted to YPbPr
Built-in anti-aliasing LPF
Output: mini HDMI® at 480p/576p (line-doubled mode)
Default 4:3 Aspect Ratio
Latency: About 53 microseconds
Audio: 24-bit stereo
Optional smoothing filter with mechanical ON/OFF switch
Fully shielded PACKAPUNCH cable from the console to the RAD2X
Compatible with following consoles:
PlayStation
PSone
PlayStation 2
Helt i nyskick och knappt använd. Komplett med en USB-kabel för ström samt HDMI-Micro Hdmi för bild medföljer så bara att starta upp & spela.
Packas väl i kartong med bubbelplast och skickas med PostNord spårbart.
Mvh
**Info från RGC hemsida under**
The RAD2X is the perfect plug and play low latency solution for connecting your Sony PlayStation 1 to a modern flat screen television. This is based on the same technology used in the RetroTINK2x with the added bonus of supporting RGB video, and unlike other all-in-one HD cable solutions the RAD2X correctly interprets the the 240p signal correctly and processes this as a progressive scan image and then line doubles this to 480p. This product does unfortunately require a microUSB power supply to function. However on the plus side the RAD2X benefits from fast switching between screen resolutions and also a smoothing feature for enhancing 3D games!
This was designed specifically for use on the original PlayStation 1 console, however this will also work on the PlayStation 2, but unfortunately the RAD2X will not accept any input signals above 240p/480i, therefore the PlayStation 2 needs to be set to RGB mode and not Y Cb/Pb Cr/Pr mode.
Specifications:
Formats: 240p/480i, 288i/576i, NTSC and PAL
Input: RGB internally converted to YPbPr
Built-in anti-aliasing LPF
Output: mini HDMI® at 480p/576p (line-doubled mode)
Default 4:3 Aspect Ratio
Latency: About 53 microseconds
Audio: 24-bit stereo
Optional smoothing filter with mechanical ON/OFF switch
Fully shielded PACKAPUNCH cable from the console to the RAD2X
Compatible with following consoles:
PlayStation
PSone
PlayStation 2
RetroTink RAD2X HDMI-adapter för Playstation 1 & 2
Avslutad 17 aug 11:48
850 kr
895 kr med köparskydd.
Annonsen är avslutad. Såld med Köp nu.
