Shadowstrike Apex Suppressor
Slutar 11 nov 18:07
Utropspris
∙0 bud
200 kr
212 kr med köparskydd.
Fraktpris inom Sverige
54 kr Instabox
54 kr PostNord
72 kr DHL
73 kr DB Schenker
Samfrakt
1 dagAlla betalningar granskas av Tradera för din säkerhet.
Direktbetalning | Delbetalning | Faktura
Köparskyddet gäller alla betalsätt
1/0
Beskrivning
APEX Suppressor — quiet control when it matters
Moving up a narrow stairwell in CQB, every sharp sound becomes a problem. APEX smooths the pressure spike so rounds land where you aim without pulling extra attention. Internal channels route gas away from the BB path to reduce turbulence and keep bursts even. The 8° forward vent shifts overpressure away from you and your team. The shell is discreet and holds up to rain, dirt, and bumps—no fuss, just steady performance.
What you’ll notice in play
Softer muzzle tone and less “pop,” especially in short bursts
More consistent grouping when the pace picks up
Fewer disturbances for teammates when you’re stacked tight
Tech specs
Thread: 14 mm CCW
Core: 12 flow-through baffles (gas guided around BB path)
Vent: 8° forward overpressure exhaust
Materials: PETG (standard), ASA (UV/heat), CF-PETG (stiffer/lighter feel)
Sound: Internal tests show about ~3–6 dB(A) lower at the muzzle (varies by replica, ammo, environment, and semi/full-auto)
3D printing settings
Material: PETG (or optional reinforced composites)
Nozzle: 0.4 mm
Layer Height: 0.15 mm
Infill: 15–25%
Orientation: Print halves flat on mating faces
Moving up a narrow stairwell in CQB, every sharp sound becomes a problem. APEX smooths the pressure spike so rounds land where you aim without pulling extra attention. Internal channels route gas away from the BB path to reduce turbulence and keep bursts even. The 8° forward vent shifts overpressure away from you and your team. The shell is discreet and holds up to rain, dirt, and bumps—no fuss, just steady performance.
What you’ll notice in play
Softer muzzle tone and less “pop,” especially in short bursts
More consistent grouping when the pace picks up
Fewer disturbances for teammates when you’re stacked tight
Tech specs
Thread: 14 mm CCW
Core: 12 flow-through baffles (gas guided around BB path)
Vent: 8° forward overpressure exhaust
Materials: PETG (standard), ASA (UV/heat), CF-PETG (stiffer/lighter feel)
Sound: Internal tests show about ~3–6 dB(A) lower at the muzzle (varies by replica, ammo, environment, and semi/full-auto)
3D printing settings
Material: PETG (or optional reinforced composites)
Nozzle: 0.4 mm
Layer Height: 0.15 mm
Infill: 15–25%
Orientation: Print halves flat on mating faces
